>
>
2022-07-16
Diaphragm coupling installation precautions
①. Products with diaphragms have edges and may cause injury. It is recommended to wear thick gloves when installing.
②. Please install a protective cover and other devices around the coupling to ensure.
③. When the shaft center deviation exceeds the allowable value during installation, the coupling may be deformed, resulting in damage or shortened service life.
④.The allowable axial deviation of Lingsi diaphragm coupling includes radial, angular and axial deviation. When installing, please make adjustments to ensure that the axial deviation is within the allowable range of the corresponding product catalog. ⑤.When When multiple deviations appear at the same time, the corresponding allowable value should be halved.
⑥. In order to prolong the service life of the coupling, it is recommended to set the shaft center deviation within 1/3 of the allowable value.
⑦. Tighten the screws after inserting the installation shaft, otherwise the coupling will be deformed. When tightening the screws, please use a torque wrench, and do not use screws other than accessories to install.
⑧. If there is an abnormal sound during operation, please stop the operation immediately and check the installation accuracy.
Check the looseness of the screws separately. It is recommended to apply adhesive on the outer surface of the screws after installation and debugging to increase the protection performance.
CONTACT US AT ANY TIME
